SOMMER CABLE - Square 4-Core MKII highflex
The sound director...
sets the tone and our cable is the same kind of Òshow-offÒ. The SQUARE is a top microphone cable with great extravagance. Two wires are paired for optimum sound. This improves the capacitive values. In studios the cable is especially used to provide phantom power or for noise suppression (here the connection should be crossed over, opposite wires RED/WHITE and BLUE/YELLOW are paired). Dense spiral shielding and an additional metalic fleece foil guarantee superior protection. Because of the complicated, precise construction this cable can often be found in highly demanding HiFi-studios. A highly valued cable because of its homogenous linear sound image.If you do not want to compromise on sound and ÒelectricsÒ in the studio, then this is your cable!
Starting now we can deliver the SQUARE equipped with fine 0.0020 inch individual litz!
THE ADVANTAGES:
- Extremely noise-free due to the crossover connection of 4 individual wires
- Suitable as a phantom power supply and stereo cable due to the use of 2 additional conductor wires
- Very good transmission safety and linear sound transmission
- Extremely robust and good tensile strength due to the thick PVC-jacket
- 100 % Shielding due to dense copper spiral shielding and additional fleece foil
THE APPLICATION:
- Professional studio and microphone technology
- Connection of effect and control units needing a return signal
- Professional MIDI-technology transmission cable
- High end connection of HiFi-units
TECHNICAL DATA: |
|
| Construction | (4LI2Y0,20mm2)(ST)DY |
| Jacket, diameter | PVC 6,5 mm |
| AWG | 25 |
| No. of inner conductors | 4 x 0,20 mm2 |
| Copper strand per conductor | 102 x 0,05 mm |
| Conductor insulation | PE |
| Shielding | copper spiral shielding + conductive fleece-foil |
| Shielding factor | 100 % |
| Temperature range | min. -30 °C |
| Temperature range | max. 70 °C |
| Fire load per m | 0,22 kWh |
| Weight per 1 m | 53 g |
| Color |  black |
ELECTRICAL DATA: |
|
| Capac. cond./cond. per 1 m | 60 pF |
| Capac. cond./cond. per 1 m | (Crossover) 37 pF |
| Capac. cond./shield. per 1 m | 115 pF |
| Capac. cond./shield. per 1 m | (Crossover) 76 pF |
| Cond. resistance per 1 km | < 93 Ohm |
| Shield. resistance per 1 km | 21 Ohm |
| Insulation resist. per 1 km | > 1 GOhm |